| Location Code | K2 - in black case |
| Manufacturer | DeWalt |
| Model | DW321 |
DeWalt jig saw. For cutting curves, making short crosscuts on boards and finishing inside corner cuts.
- Variable speed, 500-3100rpm
Changing blade:
- Lift top black knob approximately 1/4 inch.
- Turn knob counter clockwise 5-7 turns until blade chuck is completely open.
- Insert T shank or universal jigsaw blades into the chuck making certain that the back edge of the blade fits into the support roller.
- With the knob still in the up position, turn the knob clockwise until the knob starts to ratchet.
- Make sure when tightening the clamp it clicks 3 times. Push the knob down.
NOTE:
Does not come with j
ig saw blade
Guelph Tool Library
http://guelphtoollibrary.org
55 Wyndham Street North, Unit T8http://guelphtoollibrary.org
Guelph, ON, N1H 7T8
Canada
519 836 7909